Creality Ender 3 - Silence & Quality Mod
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
<h4>If You enjoyed this guide and You want to say "Thank You" please consider supporting me by sending a tip on thingiverse or my PayPal <p><a href="https://paypal.me/ArturPetrzak">here</a>.</p> </h4>
<br/>
Photos legend:
- Green - stock cooling and drivers.
- Grey - new cooling and TMC2208.
For this mod You will need:
- Motherboard MKS Gen L V1.0: http://bit.ly/2MiIcAz
- TMC2208 (It's set of 5 drivers. Ender 3 requires only 4): http://bit.ly/TMC2208
- or TMC2208 singly, not in set: http://bit.ly/2MGFmCa
- **11.2019** - Today You should choose TMC2209: http://bit.ly/TMC-2209
- USB extension cord: http://bit.ly/2nyZk74
- Micro SD card reader: http://bit.ly/2Ozbmc0
- 5015 24V fan: http://bit.ly/2KUhNUN
Of course You will need to print parts in this Thing ;) Also I recommend You to print Petsfang Duct:
- http://bit.ly/2P93L4X
It's much better than the stock cooling and will greatly improve Your print quality.
Check my I3 Mega **ULTIMATE upgrade guide!** There is a lot of knowledge which may help You get the best 3D printing results. You will find it here: http://bit.ly/2OVbu5Z
If You don't know how to calibrate Your Flowrate check this guide: http://bit.ly/2V2uXEF
If You want to make Your printer super silent You will need to swap original fans.
You can use for example these:
- http://bit.ly/2nHkAaw
If the specification is right, they should be silent. There is no 24V silent fans from famous brands like Noctua but as the motherboard fan and…
