Creality3D Ender 3 IKEA LACK enclosure with IKEA LEDBERG LED lights
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
IKEA LACK enclosure inspired by Joseph Prusa's enclosure ;)
Each enclosure is made of 2 IKEA LACK tables, 1 LED light LEDBERG also from IKEA, 8 additional wood screws 20x3mm, 6 magnets 20x6x2mm from Aliexpress
List of parts to buy per one enclosure:
- 2x Ikea LACK table
https://www.ikea.com/us/en/catalog/products/20011408/
- 1x Ikea LEDBERG lights
https://www.ikea.com/us/en/catalog/products/00302677/
- 1x 10 pack of Magnets 20x6x2mm (6 magnets used on the handles)
https://www.aliexpress.com/item/10pcs-lot-F-20x6x2-mm-N35-Strong-Square-NdFeB-Rare-Earth-Magnet-20-6-2-mm/32860245491.html?spm=a2g0s.9042311.0.0.359d4c4dqmKIxF
- 8x screw for wood 20x3mm
NO SUPPORTS NEEDED FOR PRINT!!!
The legs from lower part of the enclosure are cut so the top of the enclosure is the same height as my eyes, so I don't have to stand on my toes to see the top when changing spools ;)
There is also a filament guide with dust cleaner at the top, where PTFE tube is inserted from below and the top.
The back plexiglass will be fixed and the rest will just be mounted as pleased.
You also need to enlarge a little bit the holes on leg extendeners, the leg holders and filament guide with a drilling tool just to fit screws and the PTFE tube perfectly.
On plexiglass handles and on magnet mounts is used double sided tape. Magnets are superglued to the printed mounts.
Simplify3D profile is in the files list too…
