Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Introduction:
This is a scara robot,motion part used 42 step motors and 9g servo, used aduino mega 2560 and ramps1.4 broad,other parts you can print by your 3D printer,working range is A4(210mm*297mm),used standard G code,function is Writing and drawing.
drawbot repetition precision test：https://youtu.be/NTBxLTUPyTU
write chinese word： https://youtu.be/tPbYbp5LPhs
gcode make software：
http://lasergrbl.com/en/
other gcode maker you can try inkscape
1.https://pan.baidu.com/s/1Gzfi1ULvRPiqjJOtD2ffuQ
gcode sender is proterface:
https://pan.baidu.com/s/1TSi80GMqwPtUj-DoR1g3bA
If same control instructions is Incompatible,Pls change the gcode by manual modification
More course see：https://www.arduino.cn/forum.php?mod=viewthread&tid=81743&page=2#pid418724
Change record(Continuous updating):
1.first release 2018.9.12
2.update MBOM 2018.9.14
Be careful，the limit switch must be often closed type
3.update base to solve interference issue 2018.9.16
4.update assemble manual 2018.9.19
5.update new pen holder 2018.9.29
your need new parts for new pen holder as follow
Φ4X40mm Optic axis *2
8X4X10mm Copper sleeve *2
6.update Control instructions 2018.9.29
7.update bom，the length of the tube is not right for old bom 2018.9.30
8.update English and Chinese firmwire,update drawbot tutorial 2018.11.3
9.add automatic calibration for V6 firmwire 2018.11.26
Tip…
