Big Nuts Cup - Pencil Holder - Toothpick Holder
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a container made of three stacked nuts. It could be used as a pencil holder or a tool holder. It could even be used to hold your nuts. The smaller one in the photo was scaled to 55.55% and is used as a toothpick holder.
**There are three variations:**
1) a thin walled container that has the most room for containing things. The hole is approximately 34 cm²
2) a thick walled container that has more realistic dimensions for the nuts. The hole is approximately 22 cm²
3) a threaded container that has the most realistic nuts. The hole is approximately 20 cm²
I also included an STL with all 3 variations so that you can easily compare all 3 side by side.
I got the idea from [Nut Pen Holder](https://www.thingiverse.com/thing:3128470). I wanted to print it, but it's non-manifold with 470,495 errors and none of the three different slicers that I use could slice the model properly. So I created my own models using slightly modified variations of the nuts from [metric iso screw & nut](https://www.thingiverse.com/thing:269863). I prefer my thin-walled version anyway since there's more room in it, it uses less material to make, and there are no threads to collect dust.
----
###<img alt="Lyl3's Designs" title="Lyl3's Designs" src="https://cdn.thingiverse.com/renders/8c/4e/40/d7/ce/771666aad442acd92ec0f917fa01d022_thumb_tiny.jpg">Some of My Designs
Click an image below (opens in a new tab) or <a rel="nofollow" target="_blank" href="/Lyl3/designs">go to my designs…
