Original Hot End Fix Creality, Creality NEO, Tevo Tornado, Tronxy, JG Aurora, Eryone ThInker, MP mini, Sovol S4

This mod// fix adds a spacer inside the top of hot end that allows a cut length of tubing to be lightly compressed against the nozzle. also taking the extra work of maintaining that seal away from the teeth in the bowden coupler.

See the post processing section for step by step instructions on putting the parts together.

There are verions currently for the following model hot ends, Ender-3, Ender-3 pro Ender-5 all use the standard ender .stl), CR10, cr10 V@ and V3 (CR10S Pro/Max at bottom of page). Tevo Tornado, Tronxy X5SA

I have added an .pdf that has the tools to calibrate your printer to adjust for your now improved flow rate.

If you need new tubing and couplers use this discounted link below

https://www.th3dstudio.com/product/essential-creality-ptfe-upgrade-pack/


added larger diameter hole for the pc4 m10 size spacer for easier filament withdrawal. fits any machine with the pc4 M10 fillling, ender 3 , ender5, ender 5 plus, tornado and others

5/11/2020
added ,1mm length to all the standard type cut guages, due to many users getting under length cut without measuring the results. should not impact users significantly.
also added two more robust/thicker cut guages for those who want it more rigid in .4 and .6 blade width

5/15/2020
Added CR10S PRO V2 to the family. it has a throat that is apprx 3mm shorter than the original cr10s pro. So to prevent issues it warrants its own set of guide and spacer.

6/6/2020 added ERYONE THINKER SE using…