Hinged Handcuffs | Realistic
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
## Printable Hinged Handcuffs
---
These are a clone of the S&W hinged handcuffs from a tracing of a picture online. I was inspired by the many handcuff designs on thingiverse, especially this one: https://www.thingiverse.com/thing:2487050
## Warning
---
If you print these with a high infill, they are really freaking strong. **Don't put them on alone**, the hinge is very restrictive and depending on the key hole direction, you might have trouble getting out. They're almost not a toy.. _ ask me how I know... _
## Features
---
- Double lock
- Printed spring
- Guide groove and boss on the shackle that will keep the shackle from flexing when locked or double locked, giving it really good strength.
- Skin-contact edges are filleted for your comfort
- Bodies and hinge are printed in a single piece without any supports.
- There is a small barrier on the bottom body as well as the top cover to make picking more tricky for the lucky wearer.
- The short version of the key is too short for the wearer to use. The long version of the key is usable only if the keyholes are facing down.
## Printing tips
---
- Part quantities are listed in the file names. ** Note that the shackles and covers have left and right hand versions. **
- I printed the locking bar out of PETG as PETG seemed to last longer before the springiness was gone. PLA seems to work but eventually creeps.
- Make sure to print the dowel pin on its side. Printing it vertically will…
