Ossum RC Jeep Rat Rod Rolling Train Kit (with 2 speed gear box)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
OSSUM MB Jeep ratrod remix:
This kit should contain the full rolling train parts to convert or built a 2WD jeep with a front solid axle, it is design to fit a 35-36 900KV brushless outrunner motor working on 3 cell.
To make this built I used the raised tray, back frame, tub and windshield designed by Intashu.
The 2 speed gear box design is borrowed from 3D Anarchy Jeep built and was fully reworked for this model. It has a functional gear stick lever moving during gears change. The gearbox has a larger bottom housing to accommodate larger gears. The dog teeth are also reinforced.
Although I first used this model with a fixed 3D printed differential I have now switched to this metal solid axle which is more reliable. To get the correct track I replaced the large stock wheel hex by some thinner ones and I fitted low offset wheels.
Please note that this model requires a couple of holes to be made on the chassi frame to fit these parts, I have not redesigned the frame as I though it was not such an issue.
For gear box assembly guidelines take a look at the 3D Anarchy Instructable https://www.instructables.com/id/3D-Printed-Willys-RC-4X4/
Parts:
Intashu Hotrod Conversion Kit (pick at least the rear raised frame, tunnel tub & raised tray) https://www.thingiverse.com/thing:2442282
Original Ossum model (pick the remaining parts): https://www.thingiverse.com/thing:2056923
3D Anarchy Model (alternative for the remaining parts with diff, however the…
