Cannabis Cookie Cutter - Marijuana Leaf

**_Updated versions have precision crafted wall widths of constant thickness optimized for smooth FDM printing with a 0.4 mm nozzle and trouble-free slicing by all slicers._**

This is a cookie cutter in the shape of a cannabis leaf. The shape isn't the most realistic because it's designed to make cookies that don't have any weak areas that would make them too fragile to be practical. Cookies made with this cutter should hold together quite well. The stem may break off, but you don't really want the stems anyway. :)

There are two variations of the model; one has an additional thin cutting edge that is 1 mm in height and about 0.5 mm in width, so if you have a 0.4 mm nozzle, it will be a single path wide. That's the one shown in the photo. It's probably the one you want.

Update 2019-02-07
Two issues fixed with v2 of the models:

- Thin wall is at least 0.4 mm everywhere along the path
V1 of the model sliced and printed fine with both Slic3r-PE and FlashPrint, but I discovered that Cura had a few drop-out areas on the thin cutting edge where the mesh was slightly less than 0.4 mm, so no extrusion was generated in those areas. V2 of the thin-walled model has a more consistent wall width of 0.5 mm instead of a less consistent 0.4 mm width, so at nowhere along the path does it get below 0.4 mm.

- Single mesh instead of 2 or 3 separate meshes
A Thingiverse member reported that Simplify3D had a problem with it that I believe was because the STL was really 2 or 3…