Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A puzzle plane held together by magnets. A great creative project for adults and children alike!
**SELL PRINTS OF MY DESIGNS! License available here:**
https://cults3d.com/en/3d-model/various/commercial-license-for-all-my-models
**DISCLAIMER**
Due to their small size and the potential risk of detachment, magnets may pose a hazard to young children. As a result, this particular design is not recommended for children between the ages of 0 and 3. https://www.org/English/safety-prevention/at-home/Pages/Dangers-of-Magnetic-Toys-and-Fake-Piercings.aspx
**DESCRIPTION**
**Should you need higher quality STLs or the source STEP file so that you can easily make changes to the model, consider purchasing those here https://cults3d.com/en/3d-model/game/puzzle-plane**
In addition to the printed parts, you will require the magnets (3mm tall, 6mm diameter). There are 63 magnet sockets in total but I used probably 55 magnets.
Dimensions (L x W x H): 217mn x 255mm x 116mm
Cut up for minimal support requirement. To secure the magnets in the pockets, I used Super Glue which proved to be effective. However, caution must be exercised during this process as any spillage of the glue may cause the plastic components to adhere together.
