Falcon Heavy Rocket Lamp COMPLETE LED Arduino NANO with BASE ( SpaceX )
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Thanks to the original designer(s).
Original Mesh: https://www.thingiverse.com/thing:2789542
Splitting of Mesh: https://www.thingiverse.com/thing:2806354
Hollowing of Exhaust: https://www.thingiverse.com/thing:2810798
This is the ultimate lamp base for this falcon heavy when printed at 220%, so note the 3 falcon heavy lamp models when printed at 220% scale will fit nicely on top of the base printed at normal scale. So, this is a nice size for a night lamp.
This base will also fit the LED Strip perfectly, Arduino NANO bed, and also two holes from the center to run USB power to NANO and also features a rocker switch hole at the back, which can also be fed back into where the NANO is.
Rocker can just be inserted between the LED signal wire. Also I found that the NANO with USB is more than enough to power the LED strip :). So this is a great easy build.
Rocker: 12mm x 8mm Insert: https://www.amazon.co.uk/gp/product/B00TXNXGWE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Arduino NANO:
MakerHawk Nano V3.0,Nano board CH340G Chip/ATmega328P 5V 16MHz with USB Cable, Compatible with Arduino Nano V3.0 For Arduino
24 Bits WS2812 5050 RGB LED Ring Lamp Light with Integrated Drivers:
https://www.amazon.co.uk/gp/product/B07DKJ6SFR/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
Above is the exact things I used for this build.
Thanks to the original creators and remixes of this, my 2.5/yo Son who is obsessed with Falcon Heavy will be one happy boy on Xmas :)…
