RC Jet Boat Bashtech
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Update 19.09.2023
No development on this boat anymore, since I was busy with my new project.
you may check it out here:
https://cults3d.com/de/modell-3d/spiel/rc-raceboat-x7
Are you guys interested in a new version on the jet boat?
Let me know in the comments.
Since there were a lot of questions on how to adapt the propeller to the shaft?
here is the solution I used:
https://de.aliexpress.com/item/4000328236126.html?spm=a2g0o.productlist.main.27.57fc282dBh8xTg&algo_pvid=5912a741-7c7d-44ed-8c4c-ddd4829664d0&algo_exp_id=5912a741-7c7d-44ed-8c4c-ddd4829664d0-13&pdp_npi=4%40dis%21EUR%2110.66%219.16%21%21%2111.34%21%21%4021038edc16925337743875233eb766%2110000001345256776%21sea%21DE%210%21A&curPageLogUid=FE2jz3krzdap
Update 08.05.2020:
we used the motor:
https://hobbyking.com/de_de/propdrive-v2-series-4248-650kv-brushless-outrunner-motor.html?queryID=821f8e5965ad229ef4e011a419d1228a&objectID=59142&indexName=hbk_live_magento_de_de_products
ESC:
70 amp esc is enough
and the battery:
https://hobbyking.com/de_de/zippy-compact-3000mah-6s-20c-lipo-pack-w-xt60u-connector.html?queryID=03c93a7b7936d4de592e38b4d6628213&objectID=82607&indexName=hbk_live_magento_de_de_products
this was a quite good setup with about 15min runtime and quite good speed.
No water cooling necessary.
Update 07.05.2020:
Uploded a new propeller (2 blades) and a new rectifier. This should improve power draw a lot.
Added ne 26mm Motor mount holes
Update 13.09.2019:
added…
