Ender 3 / Ender 3 Pro - Underside PSU Mount
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
//CHANGELOG: 17 JAN 2019
- Added STL files compatible with base Ender 3 PSU.
- Added 1mm to height of Pro PSU version to provide better clearance for top-side hex screws.
====================================================================
I used this to mount my Ender 3 Pro PSU underneath an IKEA Lack enclosure.
Remix Change Notes:
- Added chamfers to thru-holes.
- Added chamfers to break most edges.
- Resized thru-hole to accommodate #8 screw.
- Added end bracket for consistent PSU location.
Use flat-head #8 x 3/4 inch wood screws. You should be fine with only one mount and one end bracket. I used an additional mount to better distribute the load.
====================================================================
Files for base Ender 3 PSU:
- Ender 3_PSU Mount.STL
- Ender 3_PSU Mount - End Bracket.STL
Files for Ender 3 Pro PSU:
- PRO Ender 3_PSU Mount.STL
- PRO Ender 3_PSU Mount - End Bracket.STL
