Ender 3 - Z-Axis Bearing Stabilizer
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a z-axis stabilizer, designed to work with the bearings found in the fidget spinners you no longer use... 22mm x 8mm x 7mm
I basically needed this to provide support for the Z-Axis Manual Adjustment Knob I added.
Enjoy
**Updates**
* v3 - 2019.03.23 - improved ability to print with no supports & increased depth by 2mm.
* v2 - 2019.02.03 - added 0.3mm between crossbar and z-axis lead screw.
**Install**
1. Insert bearings into printed stabilizer
2. Remove the 4 screws holding the top crossbar
3. Slide the Z-Axis Stabilizer onto the left end of the crossbar
4. Reattach the top bar **do not fully tighten screws down yet**
5. Turn the z-axis lead screw until the assembly is close to the top
6. Tighten down the 4 top bar screws
Now you can download and print baschz's [Z-Axis Manual Adjustment Knob](https://www.thingiverse.com/thing:2534990)
