Reciprocating rectilinear motion actuator
by 4ndreas · from Thingiverse
Personal use only
♥ 1,441 likes
↓ 9,692 downloads
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
http://youtu.be/j8raLljA-Kw
3D printed reciprocating rectilinear motion actuator like http://507movements.com/mm_114.html
Works with a nema 17 stepper or with the adapter plate with a geared DC motor.
5 and 6 mm gear available
I used 2 rods from an old DVD drive and cut some brass tube with 4x0,5mm as bearing. It works not as smooth but works directly in the printed plastic the holes are 3mm.
