Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a remix of johnnieWhiskey's original cable chain for the Creality Ender 3.
I have compiled it into a single STL file for easier printing.
PRINT CE3_cableChain_AllParts.stl ONLY!
USE OTHER PARTS AS SPARES/REPLACEMENTS.
the CE3_cableChain_AllParts.stl contains:
25x cableChain_link_v3.stl
** refer to update at the bottom
25x cableChain_linkCover_v2.stl
1x cableChain_40MountTop_v2.stl
1x cableChain_XendCover.stl
1x cableChain_40MountSide_v2.stl
1x cableChain_bedCorner_v2.stl
1x cableChain_bedCornerCover_v2.stl
1x cableChain_plateMount_v2.stl
Please note:
The main STL is aligned for the best printing outcome, and it all fits on the bed of the Ender 3. with the Settings I have detailed, it takes 10hrs and 25mins to print.
You only need :
1x cableChain_bedCorner_v2.stl
and
1x cableChain_bedCornerCover_v2.stl
or
1x cableChain_plateMount_v2.stl
not all of them.
Should you need any extra length on the cable chains, just print extras of the cableChain_link_v3.stl and cableChain_linkCover_v2.stl
UPDATE-17/02/2019:
I have just realised that it only contains 24 links, so make sure to print one extra
