Fully Functional 1847 Colt Walker
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is <b>NOT</b> an other lazy rip-off of the beautiful <a href="https://grabcad.com/library/colt-walker-1847">Colt Walker from GrabCAD by Steen Winther</a>!
I redesigned the revolver entirely from scratch based on historical patent drawings and handwritten manufacturing instructions specifically with 3D printing in mind.
The original design as well as its remixes are <b>NOT</b> or at best <b>PARTIALLY</b> functional. This is due to some major design errors, missing tolerances & intersecting parts. Trust me, I tried and was massively let down.
My version is guaranteed to work like the real thing straight off the printing bed with minimum post-processing! See <a href="https://www.youtube.com/watch?v=3x_EQzdwtPc&t=5s">teaser video</a> for proof.
The whole thing is <b>100% 3D printable - no screws, no nuts, no coil springs</b>. Only printed pushpins and leafsprings. You may have to experiment with materials a bit but even most PLA will work fine.
The whole thing comes with printing recommendations and detailed instructions to not leave you out in the cold with a bunch of peculiar plastic parts.
<blockquote><i>The original Colt Walker weights 4 1⁄2 pounds (2 kg) unloaded, has a 9-inch (230 mm) barrel, and fires a .44 caliber (0.454 in (11.5 mm) diameter) conical and round ball. It was the most powerful repeating handgun for over 100 years, until the .357 Magnum came about. It still resembles the heaviest revolver ever made and only about 1100 units were…
