Fidget Gears Revolving V2 Print-in-Place
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Maybe this saves some lives against corona: [Corona Hook](https://www.thingiverse.com/thing:4226088)
Thanks for all the successful makes! Appreciated!
If you like my design and want to support me, please leave a [Tip](https://paypal.me/kasinatorhh) :)
Update 2020-Feb-09: Want to make something cool? Have a look at my [SpiderBot](https://www.thingiverse.com/thing:4070234) :)
Update 2019-07-21 extended the post print description section.
After all the updates to my Anycubic I3 Mega-S printer I'm now able to print this at 100% size!
Updates on Printer were: TMC2208 Steppers, Marlin 1.1.9 Firmware, new part cooling.
Important parameter for print quality is "Outer walls before Inner walls"
Update 2019-05-06: have a look at the Remix for 5 gears (to do motor cycling games) https://www.thingiverse.com/thing:3609281
Update 2019-04-26: have a look at the Remix for keychain: https://www.thingiverse.com/thing:3584811
pdate 2019-04-22: added singulated disassembled V7 version. see description below.
Update 2019-04-16: added Print-in-Place HighRes V8E. Successfully tested on Silver ABS from Inofil3D. see comments on used settings.
In case the vertical gears are a little bit too tight (when using ABS) you could put one drop Nail Polish Remover on each Holder-Side and rotate until it's free, Then wash it out using Water. I then used Silicon Oil and it turns freely. V8E has 1mm less distance between big gears and changed the Gear-Twist to be in line with outer gear.…
