MagHex Tiles for Gloomhaven
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
MagHex Tiles for Gloomhaven
=======================
I created this base and tile system to allow for fast and easy scenario setup for Gloomhaven. I'm still working on the design, but I think I have it mostly nailed down now. If you run into any problems please make a post in the comments section.
Need walls? Try my [Maghex Walls for Gloomhaven](https://www.thingiverse.com/thing:3610790). They are currently a work in progress, but I'm rapidly improving the design. Help me develop it and make it better! :)
###Features
- The system allows you to print just the bases you need without printing tiles for every different terrain type.
- You only need around 163 full size bases to create the largest of dungeons in Gloomhaven (Scenario #40).
- Tile tops can be printed separately and they snap into the top of the MagHex tiles.
- You can use many other existing tiles in the system. ([Like RobagoN's terrain tiles](https://www.thingiverse.com/thing:2998323))
- MagHex bases come in three different heights to allow for pits, water, or lava to be recessed. (Spacers are not magnetic)
- Magnets are press fit into slots on the bottom of the MagHex bases. It's a friction tight fit and requires no glue. There is an opening on the top to remove them should you need to.
- MagHex bases stack for easy storage!
- Use a metal sheet on your table to really lock down the scenario!
- Created to use a bare minimum of filament. Requires about 2g of filament and print in…
