Side Spool Mount - Ender 3 (Pro) / Creality CR - Long & Extra Long
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
# Forget This!
Yes, that's right. I don't recommend this side spool mount any more!
I made a new and much better one. I call it: The Rocket!
Check it out!
https://www.thingiverse.com/thing:4691695
*Last update: 21 Dec 2020*
This is my custom version of the Side Spool Mount.
The mount is long enough for the spools to clear the Z-axis motor.
So changing filament rolls shouldn't be an issue with this one.
It is designed for the Ender 3 Pro. But should fit on the Ender 3 and Creality CR-10 too.
This includes a Long version and an Extra Long version (2.3cm longer).
There are 4 versions of the Long and Extra Long mounts (so 8 in total).
> 4 Tabs
>> This has 4 tabs that slide into the v-slots. But depending on your print, it can be too tight to fit
> 3 Tabs A & B
>> These have 3 tabs, which makes it easier to fit into the rail. Choose the version that fits your needs. Make sure the 'missing' tab is at the side, not the top.
> Skrew Holes
>> This has 2 tabs and 2 screw holes. This is the easiest to slide on to the rail and will offer the most sturdy fit. The M5*8 screws included with your printer are long enough. But I recommend using M5*10 screws.
### INSTALLATION
To install, just remove the back cap, slide it on to the bar, and place the cap back.
It's a strong, tight fit. So you will have to use some force to get it on.
### TIP
Tip: If you use this awesome Filament Holder (remix) by…
