Star Wars - Sith Holocron

# Darth Azaryia's Holocron

Get ready to channel the dark side of the Force and create your very own Sith Holocron!

There are three options for the holocron:
- *NO ELECTRONICS...* One version designed not to have any internal electrical components. Just print the inner panel (x4), the outer panel (x4), and the no-holes base and you're good to go!
- *LIGHT, SOUND, MOTION, AND MORE...* This version is designed to be made with the hardware/software that will be described below. This one requires printing the inner panel (x4), the outer panel (x4), and the base designed for the Feather M0 microcontroller.
- *DESIGN YOUR OWN...* Finally, if you're feeling extra creative, I included a blank copy of the outer panel so you can design your own holocron!

### Hardware

There are unlimited possibilites for what can be used as guts, but here's a list of what I used:
- Feather M0 Express
<https://www.adafruit.com/product/3403>
- Prop-Maker FeatherWing
<https://www.adafruit.com/product/3988>
- NeoPixel Jewel
https://www.adafruit.com/product/2226
- Small Speaker (the one below plugs in nicely to the Prop-Maker Wing)
<https://www.adafruit.com/product/3923>
- LiPo Battery and/or MicroUSB Cable
- Latching Button or Switch (the model is designed to fit a 6mm x 6mm button)
- Wire, Solder, Headers, etc. :)

The circuit itself is pretty simple. Solder female header sockets on the Feather and male headers on the FeatherWing. The FeatherWing brings…