The Gryphon (Foam Dart Blaster) [NOT LATEST VERSION SEARCH ON PRINTABLES]

**THIS IS NOT THE MOST UPDATED VERSION OF THE BLASTER. For the most updated versions, refer to:**

https://www.printables.com/model/208101-the-gryphon-foam-dart-blaster
https://github.com/Flygonial/The-Gryphon-Foam-Dart-Blaster

When I'm able to upload the source files properly again, this repository will return to being up to date.

The Gryphon is a mostly 3D printable, hobby-grade, Nerf semi-automatic flywheel blaster. Its main design features are as follows:

* Uses 130 to 180 sized (20.4mm) brushed DC motors.
* Semi-auto by rack and pinion with 1:3 gear multiplication. The trigger pull is fairly short at 12mm.
* Accepts 33 to 38mm OD flywheels (all 2mm shaft fit, superstock upgrade flywheels).
* Utilizes a horizontal flywheel cage that bolts directly onto the magwell. This is a mounting pattern less prone to misalignment than a Stryfe's mounting bosses or similar.
* Accepts both Worker Talon magazines and printed Jet Katana geometry magazines with a second release slot (ie: Kathanha, Katobu), and most full-length magazines (Buzz Bee are the only exception I might think of).
* Battery is located in the stock--there is no room anywhere else.
* Full-length feed guide integrated in magwell for maximum feeding reliability.
* Bore-axis is almost as close as possible to top rail of blaster, which is theoretically more intuitive to aim with.
* Will fit on build volume as small as 120 mm³.

Some options/variable features are:

* Variable motor…