Velociraptor Resonating Chamber Ocarina

I give you the resonating chamber of the Velociraptor.

Torn from their extinct skull and turned into a music instrument for our amusement.

Celebrate this victory by learning to play the Jurassic Park theme on the desecrated remains of this once-mighty Raptor: https://www.youtube.com/watch?v=pMZHXnVyvXM

Here is the scene from the movie when the resonating chamber is first introduced: https://www.youtube.com/watch?v=mfllzwFay_U

I printed this on my "rapid prototyper" with supports set set to "on build plate only" and a support overhang threshold of 28 degrees. I found it helpful to rotate the object around the x-axis by 7 degrees (in the negative direction in slic3r) and cut off the bottom 1.8mm so there is a bit of a flat surface to sit on.

Kazoo next? https://www.youtube.com/watch?v=fVjpxqSDmH8

TIP: If a plastic ocarina suddenly starts to sound different and you are pretty sure that it isn't you doing it, blow the excess moisture out of the airway with a quick hard puff of air.

THIS IS NOT TUNED. The ones that I have printed actually work much better than I had expected. It is relatively easy to blow-out the high note, though. The Meshmixer file is included so you can modify it yourself.

IF YOU WANT TO DO A BETTER JOB THAN I DID (very likely possible and highly encouraged), you can get the original Blender files from Lacrivilho's version of Karuuv's Ocarina (Karuuv has a ton of Blender versions of the original available as well), and get the STL…