Ender 3 External Electronics Case
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
WARNING:
>This case was designed to fit the stock Creality board.
>Although this case was never "advertised" as being designed for them, the V1.0 and V2.0 revisions of the BigTreeTech SKR Mini E3 also fit as they are the *exact* same size of the stock Creality board.
>Unfortunately, **the V3.0 revision of the SKR Mini E3 will not fit** this case as BigTreeTech decided to slightly increase the size of the board, and slightly alter the I/O spacing.
<br/><br/>
Ender 3 External Electronics Case
------------------
External electronics case integrating the stock LCD mounting bracket for the Ender 3
Uses stock parts, stock screws, and stock spare cable ties.
You will however need to extend the Z-stop wiring by your own means.
Design includes a mounting clamp for the XT60 connector which allows the power supply to be plugged directly in to the case. It does not feature a fan grill because the stock Ender 3 fan is significantly quieter without one.
Make sure you read the installation guide below.
UPDATE: (10 June 2019)
>Added modified version with the wiring hole moved to the rear for people with extended wiring looms. DO NOT use this version unless you have extended ALL of your printer's wiring (not just the Z-Stop).
UPDATE: (15 June 2019)
>I bought a "quieter" fan from China that turned out to be louder and more powerful...
I gave it a try anyway, and found that the increased airflow caused the case to resonate and make an owl sound. With…
