MagHex Doors for Gloomhaven
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
MagHex Doors for Gloomhaven
-------------------------------------------
I designed these doors to work with [MagHex Walls](https://www.thingiverse.com/thing:3610790) and [MagHex Tiles](https://www.thingiverse.com/thing:3530085). These are inspired by [Rbross' door design](https://www.thingiverse.com/thing:3290089).
After a lot of testing I have found that the magnets by themselves are not strong enough to keep the doors firmly in place. To fix this, after inserting a magnet into the frame's base, print out a separate MagHex tile blank and glue that to the bottom. This firmly locks the door frame to the MagHex tile and requires no supports!
Currently a work in progress. Proceed with caution!
###Features
- All Doors fit in every Frame! Mix and match them to suit your scenario. Thanks to [3DPrintEvangelist](https://www.thingiverse.com/3DPrintEvangelist/) for the idea!
###Notes
- Here are how many frames you'll need to have enough doors to play every scenario:
- Cobble: 6F 2P
- Stone: 4F 4P
- Dirt: 3F 2P (I use stone frames with gates)
- Wood: 4F 2P
- Print Doors upside down for a better texture on the top of the frame.
- Glue a Tile Blank to the bottom of the frames to make them insert into the MagHex bases with a MUCH more secure fit!
###To-Do
- Print and test all doors
- Make more door styles (ideas welcome!)
###Changelog
07.07.2019
- Added 7 new door types
- Decided that gluing a Tile Blank to the bottom of the frame was the best solution for…
