simplyRetro Z5 ( RetroPie / Emulation handheld )
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
[](https://ko-fi.com/A0A01MQZP)
This repository contains everything to rebuild the *simplyRetro Z5*.
The *Z5* is my first attempt to build a custom emulation handheld from scratch.
It runs a custom linux image for emulation to accomplish a fast boot time (10 seconds).
But you are also able to use Retropie or Lakka for example (in both case you will loose the on screen battery indicator).
You can find a small video of it in action on [Youtube](https://www.youtube.com/watch?v=HvgBQ3S0Ykw).
## Warning
This is my first self designed retro handheld. So please be aware that it could contain some flaws. Furthermore you should be able to handle a soldering iron and you have to understand basic circuits, if you want to rebuild the Z5. Please make sure that you understand the steps in the build section, before you decide to rebuild the handheld.
## Features
- Custom 3D printed shell
- Custom linux distribution for fast boot ([from button press to emulationstation in 10 seconds](https://imgur.com/a/TFRGUFs))
- Single press power on and long press power off
- Battery Monitor icon and safe shutdown
- Stereo Speakers, Audio Jack and Volume Control
- 12 Buttons
- 5 inch display
- Raspberry Pi Zero powered
The Pi Zero and the 5 inch display are the reason for the naming *Z5*.
## 3D Model
The model was…
