WiFi Controlled Desk Lamp
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
[](https://www.thingiverse.com/thing:4129249)
The new design can be found [here](https://www.thingiverse.com/thing:4129249).
**A WiFi controlled Desk-Lamp, essential for every 3D-Printing enthusiast and a great way to get into coding.**
It features an **easy to use webinterface that runs on an ESP8266** that was forked from [jasoncoon.](https://github.com/jasoncoon/esp8266-fastled-webserver)
The website allows for easy access to the different patterns, brightness and power control.
## Hardware
- 1x [Wemos D1 mini](http://s.click.aliexpress.com/e/_srb2XX) is recommended, but any other ESP8266 variant should work too, but it might require an additional step-down converter.
- [2m WS2812B LED Strip **IP30**](https://s.click.aliexpress.com/e/_ATtLnP), make sure you choose IP30 any other IP rating **will not fit**. I would recommend buying a strip with 60 LEDs/m.
- 1x [3.3V to 5V Logic Level Shifter](http://s.click.aliexpress.com/e/_s49Saz) (optional, required if LEDs "glitch")
- 1x [AWG 22, 3 pin wire](http://s.click.aliexpress.com/e/_sufHWZ)
- 12x [M3*8mm bolts](http://s.click.aliexpress.com/e/_s0padT)
- 8x [M3 Nuts](http://s.click.aliexpress.com/e/_rIcZSt)
- 1x [Female Power Jack](http://s.click.aliexpress.com/e/_sPe0RR)
- 1x [5V Power Supply](http://s.click.aliexpress.com/e/_sIzXbC), Note: 100 LEDs draw around 3A
# Software
**The software and…
