7 Hex Container for Small Parts and Games
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
A container consisting of 7 clustered hexagons, with lid.
I designed it for "Roll for the Galaxy: Rivalry" parts, but it could be used for anything with a set of 7.
The two main configuration options you'll want for customization are:
- Inner Height of container
- Inner Diameter of each cell
Which control the height and width of the interior cells. Wall thickness and other settings can be customized as well.
The default version requires about 126mm build size on each axis to print.
Print Notes:
- The Hex pattern on the top of the lid was achieved by setting Honeycomb infill and zero top layers when printing the lid
- The lid is a friction fit and may be quite tight. If it's too tight and a little sanding doesn't work, you might try reprinting the lid with "xy compensation" to increase the tolerances slightly.
