WALL-E Robot Replica
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Few robots are more recognisable than WALL·E; his cute appearance and distinctive personality make him instantly endearing to anyone who sees him! In this project, I designed a WALL·E replica with the aim to allow each of the robot's joints to be moveable by hand or using servo motors.
Loosely based on the dimensions and design of ChaosCoreTech's Wall-E replica (https://www.thingiverse.com/thing:1681442), this version was designed from scratch in Solidworks and allows 7 of the joints to be actuated, including the arms, neck, head and eyes. The robot design has the following features:
* Each eye can be raised and lowered independently with servo motors.
* There is room in each eye to add a small camera.
* The head can look left and right using a servo motor.
* The neck is actuated at two joints, allowing the head to look up/down and to be raised/lowered.
* Each arm has a motor at the shoulder to move it up/down.
* The arms consist of pressure-fit joints, hands, and fingers, which can be manually posed.
* The tank treads (skid steering) are fully 3D printed and can be powered using two 12V DC geared motors.
This is an ambitious project, aimed at people who want to build a fully animatronic WALL·E robot with servo-controlled joints. It took me about 3 months to design and assemble the robot, with more than a month spent on just 3D printing all of the parts. In total, there are 310 parts (although 210 of those are very small and make up the tank treads). A PDF…
