Hero Me Remix 2 with Robust Assembly & Extended Wire Management

Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242

06\01\20 Uploaded 4010 fan ducts to fit new 2019 version fan.

09\12\19 Please Note: Creality seem to have changed the design of the 4010 fan and the size of fixing. Therefore until I have had chance to revise the 4010 duct may not fit with newer machines or replacement fans..

Update:29_09_19
Uploaded Ender 5 Base Fusion File

Update:15_09_19
Revised Ender 3 - CR10 base - Modified Hot End Fan Location holes.

Update:10_09_19 B
Uploaded Fusion Base file

Update:16_08_19 B
EZABLTouch Plate_V1 incorrect hand - have uploaded EZABLTouch Plate_V2

Update:16_08_19
Uploaded a WIP fixing plate for a EZABL sensor. This was a member request with a 18mm mounting hole specified. Never used one so this is definitely work in progress. All comments welcome

Update:04_08_19
Uploaded 5015 Ducts (Straight & Offset) with BL Touch mounting panel and mounting plate. I do not own a BL Touch so this design was based on 3D models so definitely WIP. I have increased the thickness of the Duct mount to the base unit to make it even more robust on the LH duct. You may now need to use M3 x 10 mm to fix to the base unit. You will require 2 x M3 x 6 mm bolts to mount the BLT fixing plate to the duct and 2 x M3 x 6 mm bolts to mount the BLT to the fixing plate. The fixing plate…