Non planar 3D printing test
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I stumbled across a video on non planar 3D printing and then created my own with a guide to trying out the amazing work of Daniel Ahlers: https://youtu.be/gmePlcU0TRw
Included here is the Slic3r profile, STL and gcode.
Gcode updated with the correct nozzle and bed heating gcode. The print shouldn't start anymore until both are up to temp. Also added a lift to Z 20mm before the homing in the end gcode.
*Warning! Please only print the gcode if you have removed all fan ducts and probes as shown in the video. Failure to do so will cause your print head to collide with the printed part. You cannot simply remove all of the fans, a fan must remain on the heat sink to prevent clogs.*
