Articulated Shark
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
**No supports required. Just slice and print!!**
4 Versions available:
- Shark_v4_A.stl: Original design, movable jaw
- Shark_v4_B.stl: Friendly face, movable jaw
- Shark_v4_C.stl: Original design, NON-movable jaw
- Shark_v4_D.stl: Friendly face, NON-movable jaw
**Design updated to v4 for a tighter tail joint**
The non-movable versions are intended for children, as teeth are quite sharp. Or just in case you have trouble printing the movable one.
**Best results if you use a thin layer resolution (0.16 mm works perfect)**
After printing, the tail and the jaw should get free with a little force:
https://youtu.be/14z1ll9yMmU
Then just enjoy it, even in the water!!
https://youtu.be/E1W-RyH8bGA
https://youtu.be/aV-XhMr7Edc
Check my other articulated designs [HERE!](https://www.mcgybeer.xyz)
For **Commercial License** questions, [check here](https://www.mcgybeer.xyz/commercial-license)
