TT Furious Tourbillon
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Note that some of the files in the Thingiverse_files_060620.zip file are out of date. Any files posted on the 'Files' tab should replace those in the ZIP file.
12/17/23
If you use the Bambu Slicer or have a Bambu X1 or P1, there is a custom 3MF file of a modified version of the Furious on the MakerWorld site (https://makerworld.com/en/models/13297#profileId-99236). This version works with a hardware kit of the non-printed parts that is also available in their store. A link to the kit is at the bottom of the page. And there is an assembly video for the Bambu version here:
https://www.youtube.com/watch?v=bHEU9rnnu88
4/8/23
One of the bearing holes for in the L1 Escape Wheel was undersized.
I posted an L1 Escape Wheel 3.STL file that corrects this error.
3/13/23
Posted a updated Furious Build Notes PDF file, where I:
Dropped confusing paragraph in section 3.
Added L1 Balance Spring reference to Figure 1.
Added Screw 7mm End Cap references to Figure 3.
Corrected L2 Cap Screw reference in Figure 5.
I also updated the "L1 Frame Base Bridge Main.STL" file
2/17/23
Posted a updated Furious Build Notes PDF file, where I corrected some labeling errors in Figure 1.
Also I posted a missing 'Screw 10mm.STL' file and an modifed 'L1 Frame Base.STL' file which adds some convienent alignment pockets for the 'Screw 10mm' parts.
12/4/22
Acquiring the thrust bearing has been problemmatic. There are two L2 Upper Body STL files; the original file named 'L2 Upper…
