Sleigh christmas card kit 3d print
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Santa sleigh for the reindeer that I made before.
https://www.thingiverse.com/thing:3213535
Card version size is same as reindeer card organized version, but it needs 3 cards.
About 1/20 scaled model of 2 sheet sleigh ^_^
For smooth assemble , print without burr as possible.
I print it with 75% Initial Layer Flow (Cura setting) for reduce burr of first layer.
[Card version]
For present.
3 cards, 148 x 78 x t1.4mm
[Print set]
For print without frame. Easy to layout .
2 sets. about 120 x 120mm
[Parts]
For one by one print.
side x 2
sheet_back x 1
sheet x 1
floor x 1
front-back_frame x 2
sleigh x 2
line x 2
[Assemble]
1. Insert sheet_back , sheet , floor , front-back_frame to one "side".
2. Insert another "side".
3. Slide "front-back_frame" and "sheet_back".
4. Add sleigh.
[Old version of my sleigh]
https://www.thingiverse.com/thing:3273319
[TIP]
Now "TIP DESIGNER" button in my profile page is activated ^_^
I am very happy even a few.
[Buy me a coffee]
Or buy me a cup of coffee from following adress.
https://www.buymeacoffee.com/shink
[Parts]
If you want to display with some LED lights please get it from here
<a href="https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575520099&campid=5338564818&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3Dchristmas%2Blight%26_sacat%3D0%26rt%3Dnc" target="_blank">[ eBay ]</a> Christmas light
[Indoor]
<a…
