Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a Wendigo / Forest spirit / Leshen (from The Witcher) / Krampus costume set. Now with detachable horns and antlers!
It's remixed from other things (see remix sources).
## UPDATE 2024-09:
I have added octagonal alignment slot and through-hole for easier antlers alignment and attaching. The 100% scale model should be fine to fit M12 nut inside the antlers base, and M12 bolt underneath the mask rear part. There're also antler “base” bumps on the rear side of skull to add thickness and make it easier to mount the antlers (should work both as glue-in or bolt-on).
You may also want to check out these articulated finger extensions by dome7801
## UPDATE 2023-04:
As suggested in comments, I have added holes in the base of antlers to help with mounting them using screws. Also, simplified geometry, so that the updated models with mountholes have smaller filesizes.
## UPDATE 2020-10:
You probably would want to check out the great [articulated claw by JulienJeanroy](https://www.thingiverse.com/thing:4342323). It's skinnable and you may want to create your own skin for this costume or use one [provided by JulienJeanroy](https://www.thingiverse.com/thing:4391928) (although it doesn't quite fit the intended aesthetics, but it's really close to it).
# Scale it properly!
**For 57cm head circumference 103% scale up gives a snug fit, 104-105% should work better**
**For 58cm head circumference 107% scale up should work…
