Ender 3 (Pro) Spring Guides

*Update* - 02/01/2020 - The spring guide for the cable mount is now compatible with the cable chain mount from https://www.thingiverse.com/thing:2920060

*Initial upload* - 01/01/2020

**Note that these guides are designed for springs with an outer diameter of 8mm.**

### Why?
The original compression springs on my Ender 3 Pro print bed mount were buckling.
To ensure that the springs stay in shape while being compressed I made these guides.

### What does it do?
You should end up leveling your bed less often with these.

### Files included:
- Top part
- Bottom part
- Shorter bottom part for the original cable mount / cable chain mount

### Optional hardware:
- 4x nut M4
- 8x washer for M4

### What to print:
- 4x Top guide
- 3x Bottom guide
- 1x Bottom guide for the original cable mount

* Note that if you don't want the thread on the upper guide just print the lower guide 7 times (+1 for the cable mount) instead.*

### Your feedback:
Anything you would change? Just let me know.