A - Ammo Clip for Sliding Legolini Repeating Mini Bow
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
<b>Thingiverse sucks!
I didn't delete files of Sliding Legolini project. 2020.05.21 project site was blocked/removed without any warning or message.
I uploaded the Sliding Legolini project to my website https://legolini.com, so that the situation does not happen again.</b>
---
This is the automatic ammo clip for [Sliding Legolini](https://legolini.com) pump-action repeating mini bow.
If you like this project and appreciate my work, you can support me through [PayPal](https://www.paypal.com/donate/?hosted_button_id=DTDGEWZF4YA44 "Send a small tip").
This Version "A" without circle on the housing is for 160 mm bolts with steel point head, aluminum shaft (6.2 mm diameter) with plastic fletching or full plastic shaft (6 mm diameter) and fletching (cheapest bolts available also on Aliexpress).
Ammo clip dimensions: 85x53x30.8 mm
If you have other bolts than the ones shown in the first photo, check the others ammo clips: [version B](https://www.thingiverse.com/thing:4214299) or [version C](https://www.thingiverse.com/thing:4214302).
---
I think this [video](https://youtu.be/hbBHbEoSbZ0) will explain how it works.
When loading the magazine, it is recommended to tilt the bow back about 15-45 degrees. The rest is done by gravity when the ammo clip moving backwards. With a little practice, you can load a magazine very quickly.
This is kind of latch that is triggered by the movement of the clip backwards. At the end of the bow magazine is a small notch that…
