PKD-2019 Blade Runner blaster.
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I have printed at 0.2 layer height for the most part. The small parts (triggers and switches) ar printed at 0.05 layer height to get all the detail.
Version history:
1.01:
Unfortunately I discovered a problem with the clip - I made the "on/off box" too big, so the switch lever did not protrude far enough. It has been fixed now (just the clip.stl has changed).
1.0:
Updated the clip for a more accurate switch box. Updated text placement on Steyr frame. Moved old and alternative versions to a zip file called AlternativeFiles.zip to avoid confusion.
0.94beta:
Changed the clipholder to add more clearance to the receiver - it was a bit tight to get the wires in-between there.
0.93beta:
Changed the diameter of the tube to make it more accurate. Changed the boltfront so there is no gap when inserted in the frame. Fixed a minor error in the Steyr frames - if you have printed already, it just a matter of filing a little bit in the notch where the handle (boltmiddle) goes.
0.92beta:
Updated clip to include on/off lettering. New improved Steyr frame (stronger and more accurate). More accurate right cylinder cover. This is probably the last beta. If you have anything you think I should change please let me know before this friday (may 15).
0.91beta:
Added SteyerSwitchV2.STL which is more accurate. Added the grips with no pattern and a hollow version of the butt (these were requests from builders)
0.9beta:
Added clip and clipholder. The model is now complete…
