Mandalorian Helmet - Pieces fit Ender 3
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
UPDATED with v2 to reduce number of visible seams. Also reduced from 7 pieces to 6. v1 still available in the download.
This is a print breakup/remix of the impressive work created by TheBrokenNerd83. I split this helmet up into 7 piecesfor printing purposes on my Ender 3 and since it took a fair bit of time (and repetition) to get right I thought I would share the end result to save others the same effort. I added 2mmx2mm holes along each seam so that when assembling, they can be used to provide physical alignment/guides. No need to print pegs, a piece of 1.75mm filament will do the job. All pieces will print on an Ender 3 with 1mm of Raft. No supports needed except for the topmost piece.
Ear Pieces can be found on the original design by TheBrokenNerd83 at the link below
https://www.thingiverse.com/thing:3578797
all design credit belongs to
https://www.thingiverse.com/TheBrokenNerd83
