Wearable Darth Vader Helmet (for Prusa i3 sized printers)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
It has been a long journey, but I was finally able to finish this project.
Let me start by thanking Steen Winther. His model (https://grabcad.com/library/darth-vader-helmet-2) was the starting point of this remix.
14 months ago I started this project, today I end it by sharing this remix. I hope it may be usefull for some of you guys. If you decide to print one, I would love to see your results.
----
The model is split into pieces that should fit most i3 style printers. Each part has alignment holes that should help you with the assembly. Is used toothpicks to insert into the holes and line everything up before glueing. If you resize the models, those probably won't fit, so find some small nails or something else that is ridgid enough and fits the holes.
If you want the option to wear the mask, don't forget to keep that back parts (FaceR00, FaceR10, FaceL00, FaceL10) seperated from the rest. Use the alignment holes, to make sure everthing fits together, but don't glue those four parts to the others (only to each other). I hot-glued some velcro to the top, and magnets on the sides to snap the mask together.
For the lenses: you can either print them (if you only intend to display the helmet) or (vacu)form the lenses, using the buck models. I used Worbla Transparent Art dyed in Jacquard iDye Poly Red. This worked great, but unfortunately I used too much heat when forming them over the bucks and I end up damaging the Worbla. I might redo them at some point, but…
