Ender 3 External Electronics Case V2

Ender 3 External Electronics Case V2
------------------

>This case is a two piece sliding design for easy access to wiring, with a push button quick release for fast toolless access. It is designed to fit as many components as possible in a small footprint to save on bench space.

>Short demonstration video: https://www.youtube.com/watch?v=4l3C41WNFsw

>It can accommodate an SKR V1.3, a Raspberry Pi 3B+, 3 buck converters, a two channel 10amp relay, a single channel 30amp relay, two KCD11 switches, an XT60E-M panel mount power connector, and has a modular fan duct to optimize cooling.

>Due to the packaging issues of having the larger SKR V1.3 board, a Raspberry Pi, and multiple additional modules, there is only a version with the cable port on the rear (no side port version available as on V1). Unfortunately as I have rewired my own printer with a longer wiring harness I cannot confirm if the stock wiring harness of the Ender 3 is long enough to be able to be used with minimal changes as was the case with V1.


UPDATE: (30 June 2020)

>Very small revision to the case bottom. Had to move something that didn't combine properly by literally 0.051mm. Didn't affect function at all, it just annoyed my perfectionism.

>Added a .STEP file so people can customize the case for their own components.


UPDATE: (31 July 2020)

>This case is designed for an SKR V1.3, and the summary has *always* said this.

>**It does not fit stock Creality boards or any stock…