Pinecil, TS100, TS101, TS80 & TS80p Case with options, Stand, Solder Reel, Storage Box
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Printables Link
https://www.printables.com/model/237958-ts100-pinecil-ts80-ts80p-case-with-options-stand-s
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production.
Primarily based on the excellent TS100 case by Oleg Vint (Olvin)
https://www.thingiverse.com/thing:4438787
No supports should be required.
This is a structural print, I would highly recommend at least 3 walls and 50% - 80% infill. Avoid PLA with additives (silk, wood etc.) as these tend to be more brittle and have lower layer adhesion.
Hinge uses 1.75mm Filament.
Holder uses 608 bearing, M3 Nut and Bolt. (Would suggest 6900 bearing for TS80).
Join the 2 parts of the solder reel with super glue.
History
UPDATE: 28/01/2023 - Many minor fixes to models, adjustments to improve strength and printability, added several new case options for all versions.
UPDATE: 16/01/2023 - Added stronger version of stand, after years of use my stand developed some cracks in places, so I've made a beefier version.
UPDATE: 15/01/2023 - Add large version for 6ml flux syringe storage - Syringe diameter is 13.5mm.
UPDATE: 04/06/2021 - I have now had multiple confirmations that all variations for the Pinecil, TS100 and TS80 case have been successfully printed and fit correctly.
UPDATE: 08/05/2021 - Testing version for Pinecil - I've had several requests for this one. It's based off of measurements I found, I have not printed/tested…
