Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure

Don't forget to **LIKE** this thing :)

NOTE: Be carefull, use the following versions:

[for Raspberry Pi 2/3 (v042)](https://www.thingiverse.com/download:8663352)


[for Raspberry Pi 4 (v054)](https://www.thingiverse.com/download:8681526)


Raspberry Pi 4
===========

**30/09/2020 - v054 Added Step file**
**11/09/2020 - v054 (for Raspberry Pi 4)**

Added a version for Raspberry Pi 4 with internal mount points for an internal fan.

-------

Raspberry Pi 2/3
============

**30/09/2020 - v042 Added Step file**
**04/09/2020 - v042 (for Raspberry Pi 2/3)**

Added a newer design that has bigger and angled side grills, both allowing more air to get in and also easier to print than the previous version. Also this version has a 1.5 mm thickness, compared to 1.2 mm of the previous version, which makes it sturdy, less wiggly. Though, it uses more material (52 g vs 60 g) but prints around the same time. Also I had to reprint it anyway, because I had under extrusion problems.

-------

**02/09/2020 - v035 - Initial Version (for Raspberry Pi 2/3)**

**I don't recommend this version. Please use v042 for Raspberry Pi 2/3**

This is an enclosure that I designed to go under the LCD display of the Creality Ender 3 Pro (probably will fit perfectly to Ender 3 too) that also holds a Raspberry Pi 2/3 and now 4. ~~Later on, upon request, I'll add a Raspberry Pi 4 version too.~~ DONE. ~~Also want to create a version that has thicker walls. The current wall…