Snap-on XBOX gamepad HOTAS joystick
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Snap-together flight simulator HOTAS for your XBOX ONE controller.
**New 2021 version**
https://www.thingiverse.com/thing:4926213
https://www.etsy.com/listing/1049524850/3d-printable-flexure-joystick-for-xbox
**PS4 DualShock version**
https://www.thingiverse.com/thing:4618312
**XBOX 360 Version**
https://www.thingiverse.com/thing:4612448
**Switch Pro Version**
https://www.thingiverse.com/thing:4612455
**Stick on left version** (Or double sticks / HOSAS) https://www.thingiverse.com/thing:4612465
Watch the video to see how it works and how it was designed: https://youtu.be/4G6hYgOzZvI
You can print just the joystick or the throttle unit too. All parts print without supports. Check the screenshot for my recommended orientation for printing. I printed everything with 0.2 mm layers, 3 perimeters.
Try the small test pieces first, to check for printer tolerance.
Choose the loose versions of pieces if unsure.
After printing, snap the parts together like in the video. The hinge pieces must be rotated 90 degrees, where their shaft is the thinnest, before snapping them in. Then slide in your controller.
Set your control stick to the right thumbstick and your throttle to the left trigger.
Optionally, for extra spring tension, snake in a short rubber band through the special channels in the joystick mechanism.
A drop of vaseline or other grease in the joints makes the operation smooth and less noisy.
Two triggers version:…
