Cantilever Laser Engraver
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
**08/28/2021**
There is a newer version of this build that is more versatile and more rigid: https://www.thingiverse.com/thing:4934772
**07/19/2021**
I updated a couple of photos after updating the manual Z-axis carriage. If you downloaded that design (https://www.thingiverse.com/thing:4907750) before this date, you might want to revisit that design as I made some improvements to it.
**07/13/2021**
I created a manual Z-axis carriage, focus wheel & Air assist bracket for this design using 3 other designs as starting points. You can find those parts here: https://www.thingiverse.com/thing:4907750
**02/05/2021**
Here is a remix of this that someone else did using only 2020's if you want to try that.
https://www.thingiverse.com/thing:4645406
**10/20/2020**
If you do not mount your electronics above the bottom of the 2020 extrusion, you could use a longer 2020 & extend it back further attaching that back screw that holds the plates together with a T-nut in the bottom of the 2020 instead of a locknut. This would give you more support for the cantilever. If you are enclosing your engraver, the enclosure would obviously have to be deeper depending on how far you extend it back.
**9/26/2020** Update
Fixed a minor t-nut hole locations that someone spotted on the MotorMount_Above.stl part & replaced it with **MotorMount_Above_V3.stl** & the new assembly files have **_V7** in the name. It was only off .13mm (.0051 inches) at the most, but not really an issue if…
