Among Us - Dead or Alive (Improved)

alpokemon did a great job modeling the outside shape of the Among Us characters; however, the joinery I felt could use some improvements. I changed the Legs, Heads and Guts. The major changes are that this version can be used with or without magnets using the same parts; no need to choose between different parts. This was done by making the "guts" taller such that they protruded slightly into the head part which constrains its movement without additional pegs. I also correctly sized the magnet holes to fit 4mm diameter by 2mm tall disc magnets. All of these joints have improved tolerances as well; making the model much less frustrating to assemble (and minimizing the amount of post processing required).

Assembly:
- glue the visor into the head (this never fit quite right -- but with dabs of glue on the edges of the visor, it will join fairly reliably, just allow it to cure/dry by placing it on its back).
- optionally glue 4mmx2mm disc magnets into the head and legs.
- place the guts into the legs
- then push the bone into the hole of the guts; this will seat into the legs via friction and will hold the guts and bone in together.

Supports / Bed placement:
- The head and legs should be placed on the bed where they join together (some supports from the bed do help under these pieces)
- The bone should stand upright with supports from the bed surface.
- The visor should sit on the bed in the same orientation that it is on the character. While there…