iPhone 3D Scanner (supports most iPhones with Face ID)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a simple mirror attachment that can be used on any iPhone with Face ID* to enable 3d scanning using the front facing IR dot projector (Face ID). There are five main designs (determined by iPhone dimensions). Each design has two variations, one is designed to fit over my iPhone 11 Pro case (Spigen Liquid Armor - https://www.amazon.com/gp/product/B07T1P48F9/) and I believe that this is a fairly standard case thickness (approximately 2mm additional thickness on each side). The second variation is designed to fit any of the listed iPhones without any case on.
*Supports all iPhones with Face ID except the Mini variations (too narrow to easily adapt this design to it)
This is designed to fit a 2"x2" craft mirror (2 inch Glass Craft Mirror - https://www.amazon.com/gp/product/B01H0ZU1QA/) which can be glued into the design.
A note on design: I have seen and tested multiple different mirror designs and in my experience the 2"x1" mirror set ups do not work to utilize the full 3d scanning range of the iPhones TrueDepth Camera. This 2"x2" mirror design can be positioned a few mm below the TrueDepth camera for optimal scanning.
This attachment only works with an accompanying iPhone application. My preference is Capture (https://apps.apple.com/in/app/capture-3d-scan-anything/id1444183458) with high resolution scanning enabled, but this design will work with any of the apps. Another popular one is Scandy.
Depending on the app that you use, there are various steps that…
