The Key - Puzzle Box
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Checkout the IMPROVED REMIX: https://www.thingiverse.com/thing:5140026
Hilarious YouTube Homemade Commercial here:
https://www.youtube.com/watch?v=zR1Ifs6JlZ8
Assembly and SOLVE NEW here! (Jan 8, 2021)
https://www.youtube.com/watch?v=8bDUSPmLI5A
The Key - Puzzle Box is an original design by Leisure Luke. It's a 7 Piece + 2 BONUS Pieces set that is EASY TO PRINT! No Supports Needed. Print it in PLA! Parts without squiggly springs can be PETG or PLA.
My Colors:
Key - White
KeyPartH2 - White
TheLid - Marble
BottomCasePv3 - Marble
KeyPartT6_222 - Red
KeyPartH1 - Red
FreedomLockBONUS2 - Gold
DueceInlayBONUS1 - Black
KeyCapSpade - Black
0.1mm tolerance for all non-sliding parts.
0.2mm tolerance for sliding parts
0.4mm tolerance for loose key eject spring
You should be able to straight from the PRINT bed to ASSEMBLY!
No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!
As tested - 100% PLA 3D Printed!
Print all 9 pieces and they'll fit together pretty easily. The T6 is the only difficult piece to get onto the pv3. The spade cap goes on the H1 after it's threaded through the H2.
Again, see the YouTube Videos to get excited, for assembly, and if needed, to show the solve as well!
Leave your comments, and tune in for the next version - WHICH WILL BE RELEASED JANUARY 14, 2021
UPDATE Feb 14, 2021:
- KeySpadeCap_Optional_tighter - if your spade cap…
