Light panels - nanoleaf replica - wall panel
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Look for the PDF in the files part for instructions :)
Light panels
=
The print part is rather simple. As the anchor points are strong, you don't have to pin/hang every triangles to the wall, only some of them. I used double-sided tape, but I included holes if you want to screw them.
9 leds / triangles
I soldered 3 pin connectors to the LEDs : https://www.amazon.fr/VIPMOON-20Pairs-Femelle-Connecteur-Adaptateur/dp/B0761PLK2F
Here is a link to the LED I used (30 LED / m) : https://www.amazon.fr/gp/product/B01CDTECSG/ref=ppx_yo_dt_b_search_asin_title
**Arduino**
I work on a controller for the leds (arduino + rasp), with some effects (waves, fluctuations, fire, etc ...). I'll share it when it's finish. Let met know (message or comment) if you want it and I will send you a message when it's ready :)
--------
Panneaux lumineux
=
L'impression est assez simple, et leurs fixation solide : vous pouvez ne fixer au mur que quelques triangles. Pour ma part, j'ai utilisé du scotch double face, mais j'ai quand même prévu un trou pour les visser au cas où.
9 leds / triangles
Les connecteurs que j'ai utilisés : https://www.amazon.fr/VIPMOON-20Pairs-Femelle-Connecteur-Adaptateur/dp/B0761PLK2F
Les bandes de leds (30 LED / m) : https://www.amazon.fr/gp/product/B01CDTECSG/ref=ppx_yo_dt_b_search_asin_title
**Arduino**
Je suis en train de développer un contrôleur pour les leds (arduino + rasp), avec des effets de fluctuations / vagues / etc... Je le partagerais…
