BMO Nintendo Switch Stand
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
#About
A BMO Nintendo Switch Stand. Meant to be roughly the correct proportions as shown in the show given the size of the face. There is also quite a bit of extra storage space in the back. If you want something easy to print that doesn't use much filament this is not for you, my goal was to make a big boxy boi. It also requires glue and a fair bit of assembly that is not as easy as some other people have made, this may include drilling holes and putting in pins if you want the feet to not just be stuck on the front. I wont make changes or additional models, however I've included the source files for any one to remix and edit for any non-commercial uses if you want to make your own. I've also include a body without the switch stand if you just want to make a BMO model.
These parts are provided free of charge under Creative Commons - Attribution - Non-Commercial - Share Alike license. This comes with out any warranty, guarantees, or liability for the files or parts produced with them. You are responsibly for assessing the strength and appropriate application of any parts produced with these files.
# Parts to Print
There are a few different options for different printers with different capabilities. Theres also some remixes that may make it easier.
The printed parts you will need are:
1. Set of arms and legs
2. Back
3. Body
* Body One Piece
or
* Split Body Face (can be printed with buttons separately)
* Split Body Butt (can be printed in another 2…
