Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
#Overview
This is a really compact shoe rack that I designed for the entrance to our motorhome. It is easily attached using large command adhesive strips and can hold a pair of shoes up to size 11.
#Print settings
This is best printed with 3 top and bottom layers, 5 walls and 7% infill to strike a balance between material usage and strength.
eSUN PLA+ or PETG are good materials to use as they are both pretty durable to impact and flexing that is likely to happen in daily use.
When printing the base section it is best to flip the face that you will see to be the one on the print bed as that will give a cleaner look, especially when printing on a glass bed. The stepped effect from the layering process on a taper will then be hidden at the back against the wall.
#Additional hardware
You will need 2 x M4 16 or 20mm bolts. Washers are optional.
3M Large Command strips were used to attach to the wall.
